When you define a job for very long or very short documents, the system asks you to adjust the document stoppers as indicated on the display.


To adjust the collator stop position:

    1. Lift and hold the collator arm D.

    2. To remove a stopper: push it towards the system to release tab Z from the slotted hole. Tip the stopper over and lift to release tabs X and Y.

    3. To place a stopper: insert the tabs X and Y into the slotted holes. Click tab Z into the slotted hole.
    4. Repeat these steps for the remaining stoppers.
    5. Close the collator.

Date created:
08/29/2013 14:55:22
Last updated:
02/18/2014 09:16:24