Adjust the separation of special feeders as follows:


    1. Push knob A forward until it clicks.
    2. Turn knob A counter clockwise to open the separation gap.
    3. Place a document on the feeder tray and slide it into the system until it can go no further.

    4. Turn knob A clockwise to get resistance.

    5. Move the document to and fro. The separation is adjusted correctly when a slight resistance is felt on the document. Turn knob A counter clockwise again if the resistance was set too high.
    6. Pull the knob A back again when ready.

 

Date created:
08/29/2013 14:43:09
Last updated:
02/21/2014 15:31:39
Product(range):
DS-90i
Print