In the Counter submenu you can set the (daily) Job counter, the Stop counter and the Job total counter. The following will be shown in the Counter submenu:

  • Job counter (as shown), the daily job counter: number of mail sets that have been processed using this job, after tapping [Start].
  • Stop counter/Stop at value: set a number (of processed mail sets) after which the system stops processing. You can set from 5 through 9999. The system will continue processing mail sets until the job counter reaches the stop counter value. The system stops and can be restarted.
    When the processing of mail sets has been interrupted the system shows how many mail sets have been completed. This is shown at 'completed so far'.
  • Job total counter: total number of mail sets that have been processed using this job.

To reset/set the counters proceed as follows:

    1. In the Job overview screen tap the counters button.
    2. Tap the reset button for the daily job counter to set it to zero.
    3. Tap the [on/off] button to set the Stop counter to ‘on’ or ‘off’.

      If you set the Stop counter to ‘on’ you can enter the ‘Stop at value’. Enter a value from 5 through 9999.

    4. Tap the reset button for the Job total counter to set it to zero.
      1. Note

        If you set the Job total counter to zero the number history of this job will be lost.

    5. Tap [OK] to go back to the job overview screen and tap [Start].
  1. Note

    The counter settings are job related.

Date created:
08/29/2013 09:50:45
Last updated:
02/18/2014 09:16:07
Product(range):
DS-90i
Print