When dirty or saturated, clean the brushes of the envelope sealing or replace them as follows:

    1. Moisten the new brushes in water.

    2. Lift the unlocking lever A of the upper unit and pull up the upper unit.

    3. Remove the brushes one by one by pulling them down from the brush holder.

    4. Replace the brushes. Make sure that the studs on the brushes are fitted in the corresponding holes in the brush holder.

Date created:
01/09/2013 09:58:25
Last updated:
02/18/2014 09:17:47
Product(range):
DS-90i
Print