The document separation can be adjusted as follows:
  1. Note

    Check before the adjustment that the release handle D for the separation unit is in the closed (down) position.

    1. Turn the separation adjustment wheel A counter clockwise until a document can be moved backwards and forwards without resistance.

      1. Versafeeder separation

    2. Turn the separation adjustment wheel clockwise until a slight resistance is felt on the document when the document is moved backwards and forwards.
    3. Turn the separation adjustment wheel clockwise to get more resistance or counter clockwise to lower the resistance.

    4. Check the separation before starting the system. After starting the system it may occur that more than one document at a time is pulled in. If this happens, turn the separation adjustment wheel more clockwise to obtain correct operation. For poor feeding turn the separation adjustment wheel counter clockwise.

Date created:
08/30/2013 13:55:10
Last updated:
02/18/2014 09:16:56
Product(range):
DS-90i
Print