Set up a wired connection as follows: 

    1. Connect the system to a LAN with a network cable. The figure shows the LAN connector on the display module (A). 

    2. Open the supervisor settings menu.

    3. Tap the Settings tab, [Connectivity].

    4. Tap [LAN settings]. 

    5. Select Wired from the Connection pulldown menu. 

    6. Set Automatically obtain IP address (DHCP) to Yes or No. If Yes, the system connects automatically to the LAN. If No, set up a connection manually. Enter the necessary details to setup a manual connection. 


Date created:
01/17/2013 10:17:25
Last updated:
03/11/2014 10:30:02
Product(range):
DS-90i
Print