If you have to process a lot of mail sets of the same type (for example, bills), the settings can be saved as a job. The next time you need to run that job, just select the job and immediately start processing mail without defining any settings. Once a job is saved, the job settings can be edited or deleted.

This section describes running an existing pre-programmed job. To create a new job, see Creating a job.

If the IMOS operating software is not already running, it must be started using the icon on the monitor screen. To access the PC to switch it on, open the cupboard below the inserter head.

Before running a job, the paper hoppers must be loaded with documents - see Loading the paper hoppers for details.

  1. Basic Steps

    1. Press the Jobs button at the top.
    2. Select the saved job from the list.
    3. Press "Accept".
    4. Load the paper and envelopes in the hoppers indicated and press the "Run" button.

  2. Detailed Steps

    1. If the Job screen is not already displayed, press the Jobs button at the top and select the required job from the list (use the scroll arrows if needed).

      1.   
    2. Summary of selected job is shown.
      Select the saved job from the list (use the scroll arrows if needed). In this example, we are selecting the saved job named "Mailshot_Q3".
    3. If you are happy with your selection, press Accept, otherwise, select another job.
      1.   
    4. Load the paper and envelopes in the hoppers indicated and press the "Run" button to begin running the job.
      1.   
See also The Run Screen for a full description of the controls.

Paper is normally loaded in the Tower face-up and feet-first if non- reading, face down and head-first if reading. This may vary: see also appendix A.

Note: When using the cascade function, the Run button must be pressed while the machine is still running, after you have reloaded the empty hopper. This ensures the paper is fed to its pre-load position. If this is not carried out the machine will stop, even though the hopper is full: if this happens, press the Run button to continue.

Date created:
08/23/2016 18:48:16
Last updated:
08/24/2016 23:13:22
Product(range):
DS-200
Print