1. When beginning a job, the machine will stop after the first piece and ask you if the address looks correctly postioned in the transparent window.

  2. Do not proceed with Address Adjustment until you make sure that the envelope contents are being inserted correctly. If you find that a document or insert is being double fed, correct the Separation Adjustment on the hopper feeding that item and then try running your job again.

  3. Before you continue processing your job, it is always best to check and see that all of your documents and inserts are being folded and inserted correctly.

  4. Basic Steps

    When beginning a job, the machine will stop after the first piece and ask you if the address looks correctly postioned in the transparent window.

    1. Touch "No" when the machine asks if your mailpiece is correct.
    2. Touch "Yes" to confirm that the correct number of documents were inserted.
    3. Use the "+" and "-" buttons to adjust the address position.
    4. Touch "OK" to save the settings.
    5. Touch "OK" to continue the job. 

  5. Detailed Steps

    Step 1
    Because the address position is not correct, touch "No".

  6. Step 2
    Touch "Yes" to confirm that the correct number of documents were inserted.

  7. Step 3
    Touch the "+" button to move the address up. Touch the "-" button to move the address down. Touch "OK" when finished.

  8. Step 4
    Touch "OK" to continue running your job.

Date created:
08/23/2016 16:33:42
Last updated:
08/25/2016 19:23:21
Product(range):
DS-200
Print