Certain documents (eg. glossy materials) may not not feed properly with the standard feed rollers. Sets of optional feed rollers are available to assist feeding. These can be replaced as follows.
    1. Remove the 3 knobs indicated and open the side guides to their widest extent.
    2. Lift the feed bed out of the chassis to access the feed shafts beneath.
    3. Slide the spring-loaded collars inboard and lift the feed shafts out of their bearing hubs. The feed rollers can then be removed from the shaft and replaced with alternative rollers.

      When replacing the shafts, ensure that the drive pins are properly located in the hubs.

Date created:
08/29/2016 06:55:55
Last updated:
08/29/2016 06:56:56