1. Basic Steps

    1. Clean the sensors located in the collation area.
    2. Clean the sensors located in the conveyor area.
    3. Clean the sonsors located in the closer area.
    4. Clean the envelope hopper sensor.
    5. Clean the output sensor.
  2. Detailed Steps

    1. Open the top cover of the inserter.
    2. Using a non-flammable air duster, blow off any dust build up on the sensors indicated by red arrows. This view shows the collate area facing towards the envelope hopper.
    3. This view shows the collate area facing away from the envelope hopper.
    4. Open the top cover of the conveyor area (furthest away from the envelope hopper).

    5. Clean the sensors indicated by the red arrows using the air duster.

    6. Open the side cover of the inserter.
    7. Clean the sensors indicated by the red arrows using the air duster.

    8. This picture shows the view looking down on the front of the envelope hopper. Clean the sensor indicated by the red arrow.
    9. Open the front-side cover and the front output cover.

    10. Clean the sensor indicated by the arrow.

Date created:
08/26/2016 04:54:23
Last updated:
09/01/2017 17:52:06
Product(range):
DS-200
Print