• To load the hopper, rotate the adjustment knob to set the side guides slightly wider than the envelope - allow about 1mm each side).

    Slide the backstop rearwards and load the envelopes on the track with flaps facing forwards. At the front of the track, raise the centre guide and use the backstop to push the stack of envelopes forwards, so that the front ones follow the slope of the track and make contact with the ribbed rollers at the front. Do not push the backstop in too tightly - it will automatically adjust to the correct tension when the machine starts operating.

    1. Backstop
    2. Load envelopes stack to follow the contour of the track. Flaps must face upwards and forwards.
    3. Side guide adjustment knob
Date created:
03/05/2018 08:23:07
Last updated:
03/07/2018 07:43:40
Product(range):
DS-1200 G4i
Print