• The insert feeder and Envelope feeder pick up roller set can be replaced in a similar way to the Sheet Feeder.

    First remove the steel over guide by pressing the sides together to release the clips from the roller bearings.

  • Slide the complete spring loaded roller assembly to the right to release the drive dog on the left-hand end.

  • Lift the roller assembly from the left-hand side to remove.

  • Attention

    When replacing the roller assembly, make sure the drive dog is fully engaged as below.

Date created:
03/05/2018 08:52:12
Last updated:
03/07/2018 07:43:41
Product(range):
DS-1200 G4i
Print