To create a job with OCR:

    1. From the Job list menu, tap [New job].

    2. Choose [Manual] to define the job settings.

    3. Select an envelope.

    4. Tap [Main document].

    5. Tap [Custom].

    6. Enter the document size or select a standard type.

    7. Tap the [Reading] tab.

    8. Select the code type [OCR].

    9. Configure the location of the n / m characters by setting the offset of the top and left side of the sheet [1] and [2].

    10. Configure the width of the n / m characters [3].

    11. Load a sample document in the feeder tray as indicated.
    12. Tap [Verify] to check if the page n / m characters are read successfully.

    13. Tap [OK] and follow the remaining steps to complete the job.

    14. When you completed the job creation, tap [Save] to save job.

If required the maximum number of sheets, stop on sheet overflow and stop on misread can be reconfigured. Refer to Reading Settings for more details on how to change these settings.
Date created:
10/08/2013 12:25:41
Last updated:
02/18/2014 09:17:34