• Side Guide Panel

    If the job is programmed to turn the envelope, a panel in the side guide must be lowered. For all other jobs, the panel must be raised. Ensure both locking knobs are tightened after adjustment.

  • Backstop

    If the INF Turner is fitted directly to the Inserter exit, an adjustable Perspex backstop will be attached. This must be correctly set to that as the envelopes ‘bounce back’ after contact, the opposite edge aligns with the datum side-guide on the other side.

  • The angle of the conveyor will further assist in alignment with the datum side-guide.

    The backstop is not fitted when the INF Turner is fitted to a Sorter.

Date created:
03/10/2017 11:40:31
Last updated:
03/14/2017 07:26:12