1. Select Settings for Unsorted Mail in the Out-put Settings screen.
      Set Batching to Batch On if required and set required quantity in Batch Quantity.

      Set Batch Mode as follows:
      Batch and Continue: Machine will pause for the specified pause time, and then resume.
      Note: conveyor will continue to run during the pause time.

      Batch and Stop: Machine will stop and resume only when the Run button is pressed.
      Select Envelope Count under Batch Control, currently the only available option.
      Set the Batch Complete Pause Time as described in Batch and Continue above.

      When settings are complete, press the Save button.

    2. If a conveyor is fitted, select Conveyor Settings to adjust the Jog functions as follows:


      Single Jog Adjust: Ad-justs default jog step (gap) between mailpieces. Note that steps are unit-less.

      Batch Complete Jog Step: Adjusts gap before machine performs action described in ‘Batch Mode’.

      Mark Reading Jog Step: Adjusts gap created after Jog mark is read.

      Autoend Jog Step: Ad-justs gap created before machine autoends. When settings are com-plete, press Save.


      Output Settings for unsorted mail are now complete. If you are using Mail Sorting or Franking, refer to the INF Output Sorter Operator Manual. However, if an INF Output Sorter is fitted, but a dedicated franker is not connected, it is possible to turn the envelope independently.

    3. Set Turning to Unsorted Mail (or a Mailsort, if you are using one) and press the settings button.


      In the absence of a dedicated franker, no settings will be shown. Press Edit Advanced and set the envelope rotation to Auto, Yes or No.


      When settings are complete, press the Save button. The output settings are now defined, and the screen will show that this is ticked.


      You will now save the job.



Date created:
08/23/2016 18:48:16
Last updated:
08/24/2016 23:13:20