IJ-35 IJ-45 | WJ60 WJ90 Setting The Default Postage Amount

The Default Postage Value allows the user to determine the the postage value that is displayed each time the mailing machine is powered on or returns from sleep mode.

  • Tip

    After a rate change, the default postage value may need to be changed when the new postage rates become active.

  • Procedure

    1. Press the LOCK button.
    2. Press the button below "SUPERVIS".
    3. Press the Down button until "SETUP" is highlighted.
    4. Press the OK button.
    5. Select "DEFAULT STAMP VALUE" press the OK button.
    6. Use the alphanumeric keypad to enter the desired stamp value.
    7. Press the OK button.
    8. Press the LOCK button to exit supervisor mode.

  • Detailed Steps

    Step 1:
    Press the “Lock” button.

  • Step 2:
    Press the button below "Supervis".

  • Step 3:
    Enter the Supervisor PIN Code.

  • Step 4:
    Using the down arrow button,  highlight SETUP.
    - Press OK.

  • Step 5:
    Select DEFAULT STAMP VALUE.
    - Press OK.

  • Step 6:
    Use the alphanumeric keypad to enter the desired default postage amount- Press OK.

  •  

  • Step 7.
    Press the LOCK button to exit supervisor mode.

Date created:
05/22/2013 04:45:20
Last updated:
08/28/2014 16:52:44
Product(range):
IJ-35, IJ-45
Print